Back to Pool Care Home

Pool Care by JoPa

Helpful information to care for and maintain your pool

General Pool Care

  1. Vacuum and brush your pool weekly.
  2. Run the filter at least 8-12 continuous hours a day during the
    season; longer during periods of heavy use or after a heavy rain.
    Ideally, you should run the filter 24 hours a day.
  3. Testing by JoPa Company - There will be times when you should take a water sample to JoPa for professional analysis. For example, after you add a significant amount of new water, or after a heavy rain. In fact, it’s a good idea to take a sample to JoPa Company about once a month during the season.

Water Balance

  1. Check pH and alkalinity every week.
  2. Take a pool water sample to JoPa Company once a month during the season for a complete analysis, or after significant makeup water is added.

Water Testing by JoPa Company
There will be times when you take a water sample to JoPa for professional analysis. For example, after you add a significant amount of new water, or after a heavy rain. In fact, it’s a good idea to take a sample to JoPa Comany about once a month during the season.

Here are a few guidelines to help ensure a good water sample:

  1. Your water sample should be at least one quart.
  2. Take your sample about 18" below the surface, and away from the skimmer or filter returns.
  3. Take the sample in a clean plastic container.
  4. Take the sample to JoPa Company as soon as you remove it from the pool; don’t let the water sit.
    NOTE: Never take a pool water sample immediately after adding chemicals or after adding significant amounts of makeup water. Always allow the water to circulate for 8-12 hours before taking a sample.
    Important: When handling chemicals, always follow the label instructions. Remember, not all pool care products are compatible with each other.

Consult JoPa Company before adding supplemental chemicals.

 

Back to Pool Care Home